17mm Ball & Phone Adapters

17mm Ball & Phone Adapters
Clamp Mount

This sturdy clamp can be used with our mating 17mm products to hold a cell phone, GPS, camera, or small tablet just about anywhere.  The clamp quickly adjusts to fit any round bar with a diameter between .6" and 1.6" by tightening the rubber-lined jaws with the thumb screw.  Can also be..

17mm Ball w/Adhesive Base

This 1/5" long adapter plate with our standard 17mm ball can be mounted to any smooth flat surface.  Be careful with mounting, as this product uses 3M VHB adhesive tape which can be difficult to remove from sensitive surfaces.  Mates with any of our holders and adapters that have a 17mm..

17mm Socket to Tripod Adapter

This adapter mates with our 17mm ball products (or a Nuvi Ball) to provide a mounting solution for a camera or other device that uses a 1/4-20 tripod screw mount.  It can be tilted a minimum of 30° in any direction and rotated a full 360°.  Tension is easily adjusted with the included t..

17mm Short Ball Adapter

This adapter plate is about 1/2" shorter than our standard 17mm ball adapter, putting your device a little closer to the mounting bracket.  This usually reduces vibration somewhat at the expense of slightly less tilt range - 31° vs 38° for the standard ball.  Mates with any of our holde..

17mm Socket to Dual T-tab

This adapter mates with our 17mm Ball products (or a Nuvi Ball) to allow a Dual T-tab phone holder, such as our Phone/Tablet Holder, to be tilted up to 30° in any direction and rotated a full 360°.

..
AMPS to Dual T-Tab

This adapter plate mounts to any AMPS-compatible bracket and has a standard Dual T-tab to mount our Phone/Tablet holder or holders by other manufacturers.

..
17mm Socket to Single T-tab

This adapter mates with our 17mm Ball products (or a Nuvi Ball) to allow a Single T-tab phone holder, such as our Universal Phone Holder, to be tilted up to 30° in any direction and rotated a full 360°.

..
17mm Socket Adapter

If you already have our 17mm Ball adapter or any Nuvi Ball, you can snap on this adapter to provide a tilting (± 30°) and rotating (360°) flat AMPs-compatible surface.

..
Tilt-n-Turn Dual T-Tab

This is an AMPS-compatible plate with a 17mm ball and Dual T-tab adapter, which mates to our Phone/Tablet Holder and many other holders using the Dual T-tab system.  It tilts up to 30° in any direction and rotates 360° for easy positioning of your device.  Includes hardware to mount to ..

Extra Screws for Phone Holder

Spare set of 4 metric machine screws and nuts for mounting many of our AMPS-compatible products.  Works with our Universal Phone Holder, Tilt-n-Turn Adapter, Panavise Radio Bracket, etc.  Pan head Philips size - M4 x .7mm x 8mm long.

..
Tilt & Turn Adapter

This adapter mounts between a bracket and a fixed-position holder to allow the holder to be tilted and rotated.  It uses the standard AMPS mounting hole pattern and comes with hardware to attach it to your bracket.  Can be used with our Modifry Dash Bracket as well as the Panavise ..

17mm (Nuvi) Ball Adapter

This adapter plate mounts to any AMPS-compatible bracket and has a 17mm ball which mates with our Mini-Grip phone holders and adapter plates with a 17mm socket.  Also works with Garmin Nuvi GPS units.

..