This ECT Module is designed to operate the temperature gauge on S2000 clusters from model year 2000 through 2003, which have a 7-segment temperature bar graph. Also works on Honda Insightclusters and some years of Accord and Acura, though I don't have a definitive list.
All versions of this product are physically the same; the only difference is the initial programming that we load into the module based on the options you select. That programming can also be changed by the customer using a PC with an inexpensive USB-to-Serial Adapter and a simple DB-9 Serial Cable.
Note - The Civic ECT module is designed to work with a temperature sensor that is monitored by the ECM and powered by the ECM 5-volt "sensor power". You cannot use a sensor that controls the radiator fans or a sensor that was designed to operate any other type of temperature gauge, such as an OEM temperature gauge or an after-market temperature gauge. These will not work with the ECT module.
For Civic customers we recommend you measure your ECT sensor voltage as shown in the product photos. If your voltage is between .5 and .6 volts at normal engine temperatures then the initial programming supplied with this module will work in your car. If your sensor voltage is different then you will need to reprogram the module for correct operation.
In order to keep the cost down we do not include a programming cable with this product but you can make your own following the instructions in the Manuals tab, or if you prefer a pre-made cable look in the "Related Products" tab.
Measuring your ECT Sensor Voltage - (simple test) We recommend you do this before buying to confirm compatibility.
More Complete Tests - Do this if you want us to do custom programming for best operation with your car (no extra charge)
ECT-2 Programming Instructions PDF help file
Text Files A ZIP file containing the actual files used to program the ECT module display settings. Use as-is or edit them for your own settings
Make your own programming cable In case you don't want to buy ours
Below are short videos that will be helpful if you're going to be re-programming your ECT module.
The first video was made while installing a USB to Serial converter and the second shows how to set up a Generic Text Printer on your PC.