Any Vehicle

Universal Phone Holder
Soft rubber-cushioned side arms expand from 2" to 3.5" wide* and adjust up or down (independently) o..
Based on 2 reviews.
Side Marker Modules
Allows the side turn signals to operate as side marker lights while retaining turn signal functional..
Based on 4 reviews.
4-inch Black Cable Ties (100)
I use more of this size wire tie than any other.  Holds wire bundles up to 7/8" diameter, perfe..
Based on 1 reviews.
17mm (Nuvi) Ball Adapter
This adapter plate mounts to any AMPS-compatible bracket and has a 17mm ball which mates with our Mi..
Based on 1 reviews.
  Folding Cup Holder
This is the best cup holder I could find, and I tried a lot of them.  Thanks to the spring-load..
Based on 5 reviews.
Shift Beeper
This module makes it even easier to rev-it-to-the-red without short-shifting or getting slammed by t..
Based on 7 reviews.
Windscreen Camera Head
This is the original camera mounting head that we started selling in 2004 and clips on and off of ou..
Tilt-n-Turn Dual T-Tab
This is an AMPS-compatible plate with a 17mm ball and Dual T-tab adapter, which mates to our Phone/T..
Tilt-n-Turn 2
This is a newer version of our regular Tilt-n-Turn adapter and mounts between a bracket and a fixed-..
Terminal Blocks - 12-Position
You get 2 for $1.  These small white plastic terminal blocks can be cut with a razor knife to a..
Quick-clip
This plastic clip attaches to our Windscreen Base or our Tunnel-Mount bracket.  It can be used ..
Posi-Twist Splice Kit
Our least-expensive wire splicing kit.  Includes the connectors needed to splice our DCI-S2000 ..
Posi-Tap Assortment
Posi-Tap connectors are the easy and secure way to tap into an existing wire without cutting or stri..
Posi-Lock Splice Kit
Includes the connectors needed to splice our DCI-S2000 harness to your head unit harness.  Posi..
Posi-Lock In-line Fuse Holder
The easiest way to install an in-line fuse.  These Posi-Lock fuse holders can be installed with..
Phone/Tablet Holder
This slim holder has rubber gripping arms, with the bottom pair spring-loaded to securely grip phone..
Mini-Grip 3
The best of our 2-arm spring-grip holders.  It's still small and light-weight and includes our ..
Mini-Grip 2
A small and inexpensive phone holder that comes complete with our 17mm ball mount which allows it be..
Mag Holder 2
Slightly stronger magnet than our Mag Holder 1, this easy to use magnetic mounting kit includes ever..
Mag Holder 1
-20%
This easy to use magnetic mounting kit includes everything needed to attach to any AMPS pattern moun..
$12.50 $9.95
Low-Height Camera Head
-12%
This low height camera mounting head is designed to be used with our Windscreen Base Plate and puts ..
$13.00 $11.50
GoPro Tripod Adapter
This is the same adapter that is used with our GoPro Windscreen Mount, and can be used with any moun..
GoPro Head
Unlike many other GoPro adapters, all of our mounts for GOPRO® Cameras are furnished with a new stai..
GoPro Clamp Mount
This heavy-duty GoPro mount clamps to any round bar with a diameter between .6" and 1.6" by tighteni..
Extra Screws for Phone Holder
Spare set of 4 metric machine screws and nuts for mounting many of our AMPS-compatible products.&nbs..
Extra Mag Plates
Two replacement plates for use with our magentic Phone Mounts, one Black and one Silver.  Each ..
Extra Grippers for Phone Holder
Need a third or fourth "gripper" arm on your Universal Phone Holder?  These are the same rubber..
Clip Mount Kit
Use this if you want to mount our folding cup holder somewhere other than our Tunnel Bracket, or to ..
Clamp Mount
This sturdy clamp can be used with our mating 17mm products to hold a cell phone, GPS, camera, or sm..
AMPS to Single T-tab
This adapter plate mounts to any AMPS-compatible bracket (all of ours use this pattern) and has a st..
AMPS to Dual T-Tab
This adapter plate mounts to any AMPS-compatible bracket and has a standard Dual T-tab to mount our ..
17mm Socket to Tripod Adapter
This adapter mates with our 17mm ball products (or a Nuvi Ball) to provide a mounting solution for a..
17mm Socket to Single T-tab
This adapter mates with our 17mm Ball products (or a Nuvi Ball) to allow a Single T-tab phone holder..
17mm Socket to Dual T-tab
This adapter mates with our 17mm Ball products (or a Nuvi Ball) to allow a Dual T-tab phone holder, ..
17mm Socket Adapter
If you already have our 17mm Ball adapter or any Nuvi Ball, you can snap on this adapter to provide ..
17mm Short Ball Adapter
This adapter plate is about 1/2" shorter than our standard 17mm ball adapter, putting your device a ..
17mm Ball w/Adhesive Base
This 1.5" long adapter plate with our standard 17mm ball can be mounted to any smooth flat surface.&..
 Test Product
Not a valid product ..
 Shift Beeper Wiring Kit for S2000
_Includes all the wires and connectors needed to install the Shift Beeper in a Honda S2000. ..
 Shift Beeper Module with EXTRA LOUD beeper
This module makes it even easier to rev-it-to-the-red without short-shifting or getting slammed by t..