You get 2 for $1. These small white plastic terminal blocks can be cut with a razor knife to any size desired and will bend to conform to slightly curved surfaces. Can be used without mounting or may be attached using #3 x 3/4" screws (not supplied). Each pair of screw terminals is internally connected with a solid brass tube, allowing wires entering from opposite sides to be connected to each other. Accepts up to 12 gauge wire, solid or stranded. A 2mm or 2.5mm slotted screw driver is needed to tighten the screws, some 1/8" screw drivers can be used but it's a tight fit. Not recommended for wires smaller than 22 gauge.